ACS Angle Blade for Wheel Loaders

Grade well sites, roads, back-fill and clear snow with this sturdy, non-trip wheel loader blade. Lateral left-right angle adjustment allows you to control where you put your runoff. Grading The Power Angle Blade was designed to allow wheel loaders to perform heavy-duty grading. Unlike a city snow plow designed for high speeds, this blade will not to “trip” or tilt forward to let large rocks and other objects pass under it; giving the operator maximum control over the blade. Ideal for grading roads into logging and well-site areas. Operator can pivot blade to a 23 degree angle in each lateral direction from the cab. Blade control is powered by oversized, heavy-duty hydraulic cylinders. Rear skid shoes prevent the blade from digging into base. Long Life The Power Angle Blade comes equipped with a bolt-on edge that extends beyond the width of the main blade for added protection. If the bolt-on edge ever wears down, you can replace it with a new one to extend the life of your blade. All pivot points are designed to be greased to reduce friction and increase service hours.

ACS Asbury Heavy Duty General Purpose Bucket

Heavy duty bucket for ‘first-cut earth’. Best primary digging bucket for heavy duty job applications up to 3,000 lbs. per cubic yard. The flat-bottom design slices into first-cut earth, minimizing wear on tires and drive train while reducing fuel consumption and cycle time.

ACS General Purpose Wheel Loader Bucket

Excellent bucket for stockpiling & re-handling sand, loose earth and small gravel. Designed specifically for equipment rental fleets and budget-minded users who want the best attachments they can get at the lowest cost. Buckets come either coupler-equipped (we have a wide range of coupler configurations available) or can be pinned directly onto your loader arms.

ACS Heavy Duty Material Handling Bucket

Designed to re-handle the largest possible volume of material per carry, these hard working buckets are ideal for rehandling material in harsh conditions such as frozen material or concrete work surfaces. Heavier than a Light Material Bucket but lighter than a General Purpose Bucket.

ACS Hot Slag Bucket

Designed for use in slag processing centers & steel mills to deliver the lowest cost-per-hour of service in extremely high levels of temperature, abrasion and impact. We have years of experience in working with hot slag processors and will work closely with you to determine the best possible solution for the conditions of your facility. Every Asbury Hot Slag Bucket is built to order based on your specific operating environment. ACS will customize your buckets with the best material thickness, metal grades and wear parts that will deliver the most hours of service for you. The United States Patent office has granted ACS industries Patent # US2012/0030147 A1 for the design and exclusive rights to construct Buckets using a Monolithic/ Single Piece floor. This unique design adds substantial durability and lifespan to Buckets in applications seeing High heat and the thermal effects of expansion and contraction. This concept offers slag handling and extreme application customers dramatic decreases in the cost per hour of operating their Loader Buckets. Each bucket is priced individually based upon operating parameters.

ACS Light Material Bucket

Light and durable wheel loader bucket constructed of high strength steel. These hard working buckets are designed to re-handle materials up to 2,200 pounds per cubic yard such as loose ash, dry loam, solid waste, cereals/wheat, salt, gypsum, wood chips, snow and leaves under ¹normal/light conditions. Drilled to accept ACS reversible bolt-on edges. Available in either pin-on or coupler-equipped configurations (please specify when ordering.

ACS Multipurpose 4-in-1 Bucket

The ACS Multipurpose 4-in-1 Bucket can be used productively for dozing, grappling, material handling, light grading, back dragging, back filling, land clearing and high dumping making it most versatile bucket on any job site. Four different tools in one attachment: An all around general purpose bucket, dozer blade, clam shell bucket and scraper.

ACS Rock Bucket

Designed for severe applications such as granite, shot rock, aggregate, coal and recycled concrete. The Rock Bucket is the finest, most durable rock bucket you can buy. Both the Rock Guard and Severe Duty Options come standard on Buckets sized 6 yards and over. Optional straight edge, spade edge or modified spade edge. Both ACS and OEM wear part packages available.

ACS Scrap Grapple Bucket

These hard working wheel loader grapple buckets are designed to re-handle cumbersome bulk materials up to 3,000 lbs. per cubic yard such as ferrous/non-ferrous metal. The clamps keep material confined while being handled and increase bucket capacity. Grapple clamps allow bucket to hold up to 50% more than rated capacity, depending on material. Cut-out sides allow grappling of long material. Constructed of quality high-strength steel. Bolt-on or weld-in sides available. Drilled to accept optional ACS reversible bolt-on edges. Available in either pin-on or coupler-equipped configurations. Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.

ACS Side Dump Bucket

Parallel side-dumping for when there is less room to maneuver. Less maneuvering means faster cycle times, reduces fuel cost and increases project efficiency. Ideal for work in tight places such as tunnels, large sewers, congested city streets and commercial farms.

ACS Stainless Steel General Purpose Bucket

A General Purpose Bucket designed for corrosive operating applications such as battery recycling, corrosive chemicals and fertilizers. A Stainless Steel GP Bucket will deliver a 700-800% greater operating lifespan in a corrosive environment than a similar bucket manufactured with standard carbon steel. Stainless steel is used for the entire bucket including the ear group (mounting brackets on the rear), rib group, and welds to offer the maximum resistance against bucket deterioration and corrosion. An entire bucket constructed of stainless steel material provides greater life and less maintenance than buckets equipped with only stainless internal liners. Optional Bolt-On Wear edges are made of Standard Wear Alloy Material to provide the best durability against abrasive wear on the cutting edge and bottom of the bucket.

ACS Trash Grapple Bucket

These hard working trash grapple buckets are designed to re-handle light bulk materials up to 2,200 lbs. per cubic yard such as solid waste, refuse, leaves and brush under normal conditions. The grapple clamps are designed to allow the bucket to hold up to 50% more than rated capacity. Optional mesh grating is available for even greater material retention. Drilled to accept ACS reversible bolt-on edges. Available in either pin-on or coupler-equipped configurations. Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.

Strickland Backhoe Buckets

Strickland Excavator Backhoe Buckets are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Backhoe Buckets excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.

Strickland Excavator Ditching Buckets

Strickland Excavator Ditching Buckets are engineered for maximum efficiency and durability in digging and shaping ditches. Crafted with high-grade materials and precision engineering, these buckets excel in various soil conditions, offering superior performance and reliability. Their robust design ensures exceptional digging power while maintaining precise control, allowing operators to achieve smooth and accurate results even in tight spaces. Whether it's trenching, grading, or shaping tasks, Strickland Excavator Ditching Buckets are the go-to solution for contractors and operators seeking unmatched quality and performance in their excavation projects.

Strickland HD Excavator Digging Buckets

Strickland HD Excavator Digging Buckets redefine efficiency and durability in excavation operations. Crafted with precision engineering and utilizing high-quality materials, these buckets excel in demanding environments. Their reinforced structure ensures longevity, while the innovative design enhances digging performance, allowing operators to tackle various soil conditions with ease. Whether it's digging trenches, shaping landscapes, or handling heavy-duty materials, Strickland HD Excavator Digging Buckets deliver unmatched reliability and productivity on the job site.

Strickland Hi-Cap Buckets

Strickland Excavator Hi-Cap Buckets are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Hi-Cap Buckets excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.

Strickland Midi Digging Buckets

Strickland Excavator's Midi Digging Buckets are engineered with precision and durability, making them indispensable tools for excavating tasks. Crafted from high-quality materials and designed with efficiency in mind, these buckets excel in mid-sized excavators, delivering exceptional performance in various soil conditions. Whether it's trenching, grading, or general earthmoving, Strickland's Midi Digging Buckets offer unmatched reliability and productivity on the job site. With their robust construction and optimized digging geometry, these buckets ensure maximum digging power and minimal wear, promising extended longevity and cost-effectiveness for contractors and operators alike.

Strickland Mini Digging Buckets

Strickland Excavator's mini digging buckets are engineered to excel in precision and efficiency. Crafted with high-quality materials and cutting-edge design, these buckets offer unparalleled durability and performance in tight spaces. Whether tackling residential landscaping projects or urban construction sites, Strickland's mini digging buckets ensure optimal productivity and smooth operation. With a focus on reliability and versatility, they are the go-to choice for contractors and operators seeking superior excavation solutions.

Strickland Shaker Buckets

Introducing Strickland Riddle Shaker Buckets: the ultimate solution for efficient material sorting and screening on your construction or excavation site. Engineered with precision and durability in mind, these innovative attachments are designed to seamlessly integrate with your excavator, providing unparalleled performance in separating debris, rocks, and soil. With a unique riddle design and robust construction, Strickland Riddle Shaker Buckets deliver exceptional reliability and productivity, enabling you to tackle even the toughest sorting tasks with ease. Whether you're working on a small-scale project or a large-scale operation, trust in Strickland Riddle Shaker Buckets to streamline your workflow and maximize your productivity.

Strickland Skid Steer Buckets

Strickland Excavator Skid Steer Buckets are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Skid Steer Buckets excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.

Strickland Tilt Grading Excavator Buckets

Strickland Tilt Ditching Excavator Buckets are the epitome of efficiency and versatility on the construction site. Engineered with precision and durability in mind, these buckets boast a unique tilting mechanism that allows for precise grading and shaping of trenches, ditches, and embankments. Whether it's leveling terrain or creating precise angles, these buckets deliver unparalleled performance. Their robust construction ensures longevity even in the toughest of conditions, making them indispensable tools for any excavation project. With Strickland Tilt Ditching Excavator Buckets, you can tackle tasks with ease and confidence, knowing you have the best equipment at your disposal.

Strickland XHD Digging Buckets

Strickland XHD Digging Buckets are the epitome of durability and efficiency in excavation. Engineered with high-grade materials and precision manufacturing, these buckets excel in the most demanding digging tasks. Their extra heavy-duty design ensures maximum strength and longevity, capable of withstanding the harshest working conditions. Whether it's trenching, grading, or loading, Strickland XHD Digging Buckets deliver unparalleled performance, making them the go-to choice for professionals seeking reliability and productivity on the job site.

Unknown Unknown

23'', GREEN, MISSING 1 TOOTH

Strickland Concrete Pulverizers

Strickland Excavator Concrete pulverizers are the epitome of efficiency and precision in demolition work. Engineered with rugged durability and advanced technology, these pulverizers seamlessly attach to excavators, transforming them into powerful tools for breaking down concrete structures with ease. Their robust design ensures optimal performance even in the most demanding conditions, while their precise control allows for selective demolition, minimizing collateral damage and maximizing productivity. Whether tackling small-scale renovations or large-scale demolition projects, Strickland Excavator Concrete pulverizers are trusted solutions for contractors seeking unmatched performance and reliability.

Strickland CP20 Hitchable

13 Ton Pulveriser

Strickland CP40 - Direct Mount

20-30 Ton Pulveriser

Strickland CP40 Hitchable - Cracker / Splitter

Strickland CP40 Hitchable - Rebar

20-30 Ton Pulverizer

Strickland CP60 Direct Mount - Cracker Splitter

Strickland CP60 Direct Mount - Ø90 - Ø100 Pin Option

30-40 TON PULVERISER

Strickland CP60 Hitchable

30-40 TON PULVERISER

Strickland CP80 - Hitchable

40-50 TON PULVERISER

Strickland CP80 Direct Mount

40-50 TON PULVERISER

ACS Hook Style Couplers , Cat Balderson, Cat IT, Volvo or JCB Compatible

ACS 4-Point Couplers are available in four compatible coupler types. If you already own loader attachments equipped with one of these coupler styles, Cat Balderson, Cat IT, Volvo and JCB; ACS Industries can equip your machine with a rugged coupler that will interface with those existing attachments. This coupler allows a machine owner to obtain a different OEM brand loader, install an ACS 4-Point Coupler, then use all of their existing coupler equipped attachments. This saves expensive changeover or modifications to existing attachments and frees you from being “Locked” into just one brand machine because your attachments have a brand specific coupler receiver installed. For example, if you have Cat coupler-equipped attachments you can choose to buy a Deere machine and install an ACS Cat-compatible coupler to the Deere machine and use all of your existing Cat coupler-equipped attachments. This would apply to Volvo machines to Balderson coupler-equipped attachments, Case to Volvo-equipped attachments, Komatsu to Cat IT attachments. The combinations are endless in the variation and opportunities these ACS 4-Point Couplers can offer. These couplers install to your machine using the OEM pins and include the required Installation Kit containing all components required to operate the coupler. Identification of the exact type of coupler to be provided will be required to assure compatibility. Volvo is a registered trademark of Volvo Trademark Holding AB and/or AB Volvo (

ACS JRB 416, 418 and 420 Compatible Coupler

The Female Adapter allows you to retrofit any of your existing non-compatible attachments to be fully compatible with the your new coupler. We designed the Female Adapter to be both easily installed on the rear of your existing attachments and rugged enough to keep your tool arsenal fully productive.

ACS Pro Series 2000 Coupler

The interchangability of the Pro Series 2000 allows you to easily exchange attachments among various brands of loaders. The Pro Series 2000 coupler is designed for both 3-arm and 4-arm loaders. Single-Point Hookup The Pro Series 2000 features the original single-point hookup design for fast, smooth coupling - even on uneven terrain. The compact design balances strength with performance, keeping the payload as close as possible to the loader. The result is the lowest CG (Center of Gravity) extension in the market – less than 2” for an average 2.5-yard loader. One loader, many tools While you can order all of your new attachments to work as a kit with the Pro Series 2000, we realize that you can’t just throw away the buckets you already own. That’s why we designed adapters that are both easily installed on the rear of your existing attachments and rugged enough to keep your tool arsenal fully productive.

ACS Railcar Couplers for Wheel Loaders

ACS Adjustable Alignment Railcar Couplers equip your wheel loader with standard EE60C RR knuckles with 26 degrees of swivel. Ideal for environments where the wheel loader has to couple-up off-center or work on curved tracks. Optional hydraulic pin lift available. Wheel loader requires third function hydraulics to actuate pin lift with this option. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000 and JRB compatible. Available in both Rear and Front mount.

ACS Series 1000 Hydraulic Coupler

Our legacy coupler system that established our reputation as the leader in attachment changeover technology. Highly regarded for its dependability — we still make it because they still demand it. Since 1968, the Series 1000 has provided outstanding service for thousands of contractors, municipalities, utilities, state agencies and all branches of the military. The Series 1000 Coupler system is available for all 4-arm and Z-bar wheel track loaders, tractor-loaderbackhoes and motor graders. Single-Point Hookup The Series 1000 Coupler was the innovator for the quick coupler industry, introducing the concept of “single point hookup” to the marketplace. The Series 1000 also features an open frame design, full faceplate contact and heavy-duty construction. One loader, many tools While you can order all of your new attachments to work as a kit with the Series 1000, we realize that you can’t just throw away the buckets you already own. That’s why we designed adapters that are both easily installed on your existing attachments and rugged enough to keep your tool arsenal fully productive.

Strickland S-Lock Couplers

Strickland S-Lock Couplers represent the epitome of efficiency and safety in the realm of construction equipment attachments. These innovative couplers offer a seamless and secure connection between various machine attachments and excavators, ensuring swift and effortless interchangeability on-site. Engineered with precision, the S-Lock Couplers boast a robust design that prioritizes durability and longevity, capable of withstanding the rigors of demanding construction environments. With its intuitive locking mechanism, operators can swiftly switch between attachments without compromising safety or productivity. Whether it's digging, lifting, or handling materials, Strickland S-Lock Couplers stand as a testament to reliability and performance, empowering construction professionals to tackle diverse tasks with confidence and ease.

Strickland S-Lock Tilt Couplers

Strickland S-Lock Tilt Couplers offer a revolutionary solution for enhancing excavator versatility and productivity. With their robust design and advanced engineering, these couplers provide seamless and efficient attachment changes, enabling operators to switch between various tools swiftly. The S-Lock mechanism ensures a secure connection, minimizing downtime and maximizing safety on the job site. Furthermore, the tilting capability adds a new dimension to excavator functionality, allowing operators to precisely angle attachments for enhanced performance in a wide range of applications. Strickland S-Lock Tilt Couplers are the ultimate choice for contractors seeking superior performance and reliability in their equipment.

ACS Car Body Fork

The ACS Car Body Fork was designed specifically for auto salvage yards. The heavy-duty design and rugged, all welded construction allow your ACS fork to deliver the service you need without down time for maintenance. The tines are forged, heat treated and shaft mounted in a fixed position. Backrest is designed for maximum support of the car body. Custom backrest heights available. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000, and JRB compatible.

ACS Car Clamping Fork

Safely move multiple car bodies, tractor trailers and other large, bulky payloads safely and securely. Designed with auto salvage yards and car shredding operations in mind, the all-welded construction and strong hydraulic top clamp give you the strength you need and security you want by providing up to 2,500 pounds per square inch of hydraulic downward pressure on your payload. The tines are forged, heat treated and shaft mounted in a fixed position. Backrest is designed for maximum support of the car bodies. Easily Secures Stacked cars for efficient and safe transport. Extra Clamp Height Distance to handle Multiple Vehicles. Wide Clamp Opening allows transporting of Semi Trailers and bulky material.

ACS Construction Duty Fork

The Construction Duty Fork is designed to handle pallets and construction material while maintaining a high level of visibility. It is also an invaluable attachment to have on-hand for yard & road maintenance. The tines are forged and heat treated to deliver the performance you need on a tough job site. Tine width is adjusted manually. Multiple tine lengths available. Available in either pin-on or coupler-equipped configurations.

ACS Double Top Clamp Fork

Double Top Clamp Forks were designed to equip your wheel loader to handle long material such as lumber, pipe and logs. Clamps operate individually to enable a firm grasp of uneven loads on rough terrain. The tines are heat treated and forged and are available in either floating or anti-swing options. Available in either pin-on or coupler-equipped configuration. Wheel loader requires third function hydraulics to actuate clamp cylinders. Attachment jumper hoses are included.

ACS Hydraulic Width Adjustable Fork

Designed for reliable daily service under rugged conditions and engineered to Industrial Truck Association (ITA) standards. Tines are forged and heat treated and the tine-width is hydraulically adjustable. Available with either one or two hydraulic cylinders. Available in either pin-on or coupler-equipped configuration. Loader requires third function hydraulics to actuate tine cylinders. Jumper hoses come included with fork.

ACS Mill Yard Double Top Clamp Fork

Double Top Clamp Mill Yard Forks for wheel loaders are ideal for mill yards where logs are handled on a regular basis. Designed for log loading, unloading and picking & handling single logs. Dual Clamp Arms, each with their own clamping cylinder, better clamp tapered logs or unequal size loads. The clamp arms are set in a position to bypass the tines allowing further retraction to clamp smaller loads or single logs. Mill Yard Forks contain fabricated tapered box section tines resulting in a maximum strength rating for obtaining high breakout forces and load carrying abilities. The tines are tapered to a point in front enabling the operator to insert the tines between logs for sorting and also assist in a more controlled unloading of the payload. The tapered tines work in conjunction with the large rear inside radius force the logs to be lifted & rolled upwards as the loader penetrates piles, maximizing the ability to fill the fork at every pass. Available in either pin-on or coupler-equipped configuration. Loader requires third function hydraulics to actuate clamp cylinders. Jumper hoses included.

ACS Mill Yard Paddle Top Clamp Fork

Paddle Top Clamp Mill Yard Forks for wheel loaders are ideal for mill yards where logs are handled on a regular basis. Narrow paddle tip ideal for fine control when picking and sorting. Designed specifically for log loading, unloading and picking & handling single logs. The clamp arms, with dual clamping cylinders, are set in a position to bypass the tines allowing further retraction to clamp smaller loads or single logs Mill Yard Forks contain fabricated tapered box section tines resulting in a maximum strength rating for obtaining high breakout forces and load carrying abilities. The tines are tapered to a point enabling the operator to insert the tines between logs for sorting and also assist in a more controlled unloading of the payload. The tapered tines work in conjunction with the large rear inside radius to force the logs to be lifted and roll upwards as the loader penetrates piles to maximize the ability to fill the fork at every pass. Available in either pin-on or coupler-equipped configuration. Loader requires third function hydraulics to actuate clamp cylinders. Jumper hoses included.

ACS Paddle Top Clamp Fork

ACS Paddle Top Clamp Forks are designed for handling baled material (cardboard, straw, hay), logs, lumber, and pipe. The top hydraulic clamp enables the operator to carry additional payload and provides stability on rough terrain. The tines are heat treated and forged and come with the option of either floating or anti-swing. Wheel loader requires third function hydraulics to actuate clamp cylinders. Attachment jumper hoses are included. Available in either pin-on or coupler-equipped configuration.

ACS Pipe Grapple Fork

The ultra-wide tine setting and unique clamp design on the ACS Pipe Grapple Forks make this attachment ideal for bulk handling very long pipe, both wide and small diameter. Tines are fixed to stay in line with clamps to eliminate potential stress points on handled pipe. Available with optional poly lining on tines and clamps to provide additional protection for handled product. Wheel loader requires third function hydraulics to actuate grapple function cylinders and clamping. Attachment jumper hoses are included. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000, and JRB compatible.

ACS Single Top Clamp Fork

ACS Single-Top Clamp Forks are designed for handling logs, lumber, pipe and other long material. The top hydraulic clamp enables the operator to carry additional payload and provides stability on rough terrain. The tines are heat treated and forged and come with the option of either floating or anti-swing. Wheel loader requires third function hydraulics to actuate clamp cylinders. Attachment jumper hoses are included. Available in either pin-on or coupler-equipped configuration.

ACS Utility ITA Pallet Fork

Pallet Fork for small to mid-sized wheel loaders engineered to Industrial Truck Association (ITA) standards. Tines are forged and heat treated. Rugged construction. Manually adjustable. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000, and JRB compatible.

ACS Vertical Arm Pipe Grapple Fork

Designed to safely handle large diameter pipe. Independent clamp arms release to a vertical position to allow easier approach to pipe stored in racks. * Excellent operator visibility. * Firm load control on uneven surfaces. * Optional 3rd middle tine for handling pallets. * Optional Poly – Surface covering for pipe protection. * Pin-On or Coupler Equipped configurations available. Third-Function machine hydraulics are required for operation. Jumper Hoses are included with your purchase of each Vertical Arm Pipe Grapple Fork.

ACS Wide Carriage Fork

The Wide Carriage Fork is designed to maintain a high level of visibility while handling long material such as lumber and pipe. The tines are forged and heat treated to deliver the performance you need on a tough job site. Tine width is adjusted manually.

Strickland HDR Grapples

Strickland Excavator's HDR Grapples are engineered to deliver unmatched performance in handling heavy-duty materials with precision and efficiency. Crafted with durability in mind, these grapples boast a robust design that ensures reliable operation even in the toughest environments. Whether grappling logs, scrap metal, or construction debris, Strickland's HDR Grapples provide superior gripping power and versatility, making them an indispensable tool for contractors and operators seeking top-notch performance from their excavators.

Soosan SB40 TS-P

YELLOW, HYDRUALIC •For Mini Excavator or Skid Steer •Op Weight 295 kg •Operating Pressure 110-140 kg/cm •Soosan SB40 TS-P Hydraulic Hammer, Serial Number 24372, Op Weight 295 kg, Oil Flow Rate 40-70 l/min, Operating Pressure 110-140 kg/cm, Hydraulic Breaker hammer for mini Excavator or skid steer, ask for more details, Located in La Grange, TX.

ACS Extendable Lifting Jib Boom for pipe, pre-cast concrete cylinder handling and material lifting

The ACS Extendable Lifting Jib Boom is the most efficient attachment for safely handling large diameter pre-cast pipe and concrete manholes, lifting and positioning building components and material. Tough tubular construction and manually extendable to multiple lengths, this jib boom eliminates overhead or mobile cranes in many applications. Great for Reinforced Concrete Pipe installation and handling. Two-piece booms are standard. Three-piece booms are available options. Available in either pin-on or coupler-equipped configuration.

ACS Clearing Rake

ACS Clearing Loader Rakes equip your loader for general land clearing and clean up including uprooting and removal of trees, piling brush and loading trucks, storm cleanup, light rocks and demolition material. Crafted to deliver reliable service under tough conditions presented by clearing land. Tree push bar across top of frame equipped with teeth to maintain control over tree as it is being pushed over. Long rake tines designed to maximize breakout and allow more material to be carried. Available in either pin-on or coupler-equipped configuration.

ACS Grapple Rake

ACS Grapple Loader Rakes equip your loader with maximum load control for general land clearing and clean up including uprooting and removal of trees, building windrows and loading trucks, storm cleanup, light rocks and demolition material. Crafted to deliver reliable service under the harsh conditions that come with clearing land. Tree push bar across top of frame equipped with teeth to maintain control over tree as it is being pushed over. Long rake tines designed to maximize breakout and allow more material to be carried. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000, and JRB compatible.

ACS Stacking Rake

Designed with a rolling radius for optimum boil when pushing debris, ACS Stacking Loader Rakes equip your loader for general land clearing and clean up including uprooting and removal of trees, building windrows and loading trucks, storm cleanup, light rocks and demolition material. Crafted to deliver reliable service under the harsh conditions that come with clearing land. Serrated push-bar across top of frame maintains control over trees as they get pushed over. Long rake tines are designed to maximize breakout and allow more material to be carried. Available in either pin-on or coupler-equipped configuration. Coupler-equipped options include ACS Series 1000, ACS Pro Series 2000 and JRB Compatible.

ACS Top Clamp Clearing Rake

Strickland Land Rakes

Strickland Excavator Stone Rakes are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Stone Rakes excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.

Strickland Ripper Hooks

Strickland Ripper Hooks are the epitome of durability and efficiency in heavy-duty construction and demolition work. Crafted with precision engineering and robust materials, these hooks are designed to withstand the most demanding conditions. Whether it's tearing down structures or handling large loads, Strickland Ripper Hooks offer unmatched strength and reliability. With innovative features and a reputation for superior performance, they are the go-to choice for professionals who demand nothing but the best from their equipment.

Strickland Main Pin Thumbs

Strickland S-Lock Tilt Couplers offer a revolutionary solution for enhancing excavator versatility and productivity. With their robust design and advanced engineering, these couplers provide seamless and efficient attachment changes, enabling operators to switch between various tools swiftly. The S-Lock mechanism ensures a secure connection, minimizing downtime and maximizing safety on the job site. Furthermore, the tilting capability adds a new dimension to excavator functionality, allowing operators to precisely angle attachments for enhanced performance in a wide range of applications. Strickland S-Lock Tilt Couplers are the ultimate choice for contractors seeking superior performance and reliability in their equipment.

Strickland Pro Link Thumb

Strickland Excavator Pro Link Thumb are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Pro Link Thumb excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.

Strickland Weld on Thumb

Strickland Excavator Weld on Thumb are the epitome of efficiency and durability in handling stone removal tasks. Designed to seamlessly attach to excavators, these rakes boast robust construction, capable of withstanding the rigors of demanding excavation projects. Whether clearing debris from construction sites or preparing land for agricultural purposes, Strickland Excavator Weld on Thumb excel in swiftly gathering and removing stones of various sizes with precision. Their versatile design ensures optimal performance across diverse terrain, making them indispensable tools for contractors and farmers alike seeking reliable and high-performance equipment for their operations.